Activated Carbon Flash Vaporization Dryer

Activated carbon is a specially treated carbon in which organic raw materials are heated under air-isolated conditions to reduce the non-carbon components (carbonization), and then reacted with gases to erode the surface and produce a microporous and well-developed structure (activation). Since the process of activation is a microscopic process, i.e., the surface erosion of a large number of molecular carbons is point erosion, it results in an activated carbon surface with numerous fine pores. The surface area of each gram of activated carbon is 500~1500m, and almost all applications of activated carbon are based on this feature of activated carbon.

Activated carbon is widely used as the main solid adsorbent in the chemical industry, medicine, environment, etc. It is fei very important part, used to adsorb the substances with higher boiling point and critical temperature and the organic substances with larger molecular weight. In air purification, water treatment and other areas of application also shows a trend of application growth, special high-grade carbon such as high specific surface area carbon, high benzene carbon, fiber carbon has penetrated into the aerospace, electronics, communications, energy, bioengineering and life sciences and other fields.

Brief description of activated peptide flash vaporization dryer equipment:

Activated peptide flash evaporation dryer is to wind as a wet, heat carrier, the fan as a driving force, to realize the drying process of the quality, heat exchange, so that the wet part of the material phase changes, to achieve the separation of the material and the wet part. Drying generally use natural wind, natural wind through the air filter, blown by the fan into the steam heat exchanger, coal-fired or oil-fired or gas-fired hot air furnace to be heated, the heated hot air and then through the flash steam host hot air distributor, distributed into a uniform, certain flow rate, direction of flow of the cyclone. Cyclone and spiral feeder to join the material wet material contact, collision, the beginning of mass heat exchange, separation and a series of physical changes, making the material and the moisture contained in the separation.

Activated carbon flash vaporization dryer equipment advantages:

1, a variety of charging device for choice, charging continuous and stable, will not produce bridging phenomenon.
2、Special cooling device is set at the bottom of the dryer to avoid material deterioration at the bottom of the high temperature area.
3、Special air pressure sealing device and bearing cooling device can effectively prolong the service life of transmission part.
4、Special air separation device reduces the resistance of the equipment, and at the same time makes the wind speed in the tower tend to be balanced.
5、The drying chamber is equipped with grading ring and cyclone sheet, the fineness of material and final water can be adjustable and controllable.
6、High circumferential air velocity inside the drying chamber, short residence time of materials, effectively preventing materials from sticking to the wall and heat-sensitive materials deterioration.